-
Water spray sterilization Retort
Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is sprayed onto the product through the water pump and the nozzles distributed in the retort to achieve the purpose of sterilization. Accurate temperature and pressure control can be suitable for a variety of packaged products. -
Cascade retort
Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is evenly cascaded from top to bottom through the large-flow water pump and the water separator plate on the top of the retort to achieve the purpose of sterilization. The precise temperature and pressure control can be suitable for a variety of packaged products. The simple and reliable characteristics make DTS sterilization retort widely used in the Chinese beverage industry. -
Sides spray retort
Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is sprayed onto the product through the water pump and the nozzles distributed at the four corners of each retort tray to achieve the purpose of sterilization. It guarantees the uniformity of the temperature during the heating and cooling stages, and is especially suitable for products packed in soft bags, especially suitable to the heat-sensitive products.
SPECIALIZE IN STERILIZATION • FOCUS ON HIGH-END