As we all know, retort is a high-temperature pressure vessel, the safety of the pressure vessel is crucial and should not be underestimated. DTS retort in the safety of particular attention, then we use the sterilization retort is to choose the pressure vessel in line with the safety norms, the second is to pay attention to the use of the operating norms, to avoid the occurrence of safety problems.
（1） Safety protection performance of DTS retorts
1、 the safety of manual operation: 5 safety interlock device, retort door is not closed, hot water can not enter the retort, and can not start the sterilization program. retort door with pressure detection alarm device, multiple protection to avoid operator misuse.
2、retort pressure is not released, can not open the retort door, to avoid the sudden release of pressure scalding operators.
3、If the sealing inside the retort is not tight, it can’t enter the retort program, and the system will start alarm prompt.
4、Divided into equipment safety alarm, operation self-test alarm, maintenance warning 3 kinds of more than 90 warning information. Convenient for customers to repair and maintenance, reduce unplanned downtime.
When using the retort, not only the safety protection performance of the retort should meet the safety standards, but also pay attention to the standard of operation when using the retort.
（2）Safety precautions：
1.Before and after the use of retort should carefully check the drainage, air supply piping accessories, safety valves, pressure gauges, thermometers, whether sensitive and good to use, to confirm the safety of the work before the work as well as the end of the work.
2. Operation should make the retort in operation to maintain stable pressure and temperature.
3. Strictly prohibit over-temperature, over-pressure operation.
4. Do a good job before, during and after the production of inspection work, timely detection of abnormal state of the equipment, and take appropriate measures to deal with.
5. Pay attention to the alarm prompts in the operation of the equipment, check the causes of equipment alarms in time and solve them.
6. Master the handling of emergencies. Emergency measures should be taken to stop the vessel operation when failure occurs and threatens the safety.
Post time: Feb-26-2024