The sterilization retort is safe, complete, sensitive and reliable. Maintenance and regular calibration should be added during use. The start and trip pressure of the retort safety valve should be equal to the design pressure, which should be sensitive and reliable. So what are the precautions for the operation of the sterilizer?
When the sterilization retort is started, random adjustments should be prevented. The accuracy grade of the pressure gage and the thermometer is 1.5, and the difference within the tolerance is normal.
Before putting the product into the retort, the operator needs to check whether there are people or other sundries in the pot. After confirmation, push the product into the retort.
After entering the sterilization retort, first check whether the sealing ring of the retort door is damaged or detached from the groove. After confirming that it is normal, close and lock the retort door.
When the equipment is running, the operator needs to conduct on-site monitoring, closely monitor the operating status of the pressure gauge, water level gauge, and safety valve, and deal with the problem in time.
It is strictly prohibited to push the product when entering and leaving the sterilization pot, so as not to damage the pipeline and temperature sensor.
When an alarm appears during the operation of the equipment, the operator needs to quickly find the cause and take corresponding measures.
When the operator hears the end of operation alarm, he should close the control switch in time, open the venting valve, and observe the indications of the pressure gage and water level gage at the same time, and confirm that the water level and pressure of the sterilization retort are zero before opening the retort door.
Post time: Oct-29-2021